Tough dirt in industrial kitchens destroys the carbonized heavy and burnt oil layer. Thanks to its strong alkali formula, it can be used in stoves, ovens, grills, etc. It easily dissolves the oil layers formed in kitchen equipment. It is safer than hydrofluoric acid cleaners. Its foaming effect allows it to hold onto the vertical surface. In this way, it makes maximum cleaning. It acts quickly between 3 and 5 minutes. It is very economical as it is diluted with water in a ratio of 1 to 25. It is used only on stainless steel surfaces.
USAGE: It can be applied by hand sprayers, pressure sprayers, dipping and brush. Application surfaces should be heated to at least 70ºC. After the product is applied, it is waited for 3 to 5 minutes, if necessary, it is brushed and rinsed with pressurized water before the product is allowed to dry. It should only be used on stainless steel surfaces.
ATTENTION OF THE CONSUMER: Be sure to read the instructions for use. Wear gloves while using. Keep away from children.Do not mix with another product or substance. It releases toxic gases in contact with acids. Do not use for hand, face and food cleaning. Keep away from foodstuffs. After the packaging is completely emptied, send it to the recycling process. Harmful if swallowed. If accidentally swallowed, seek medical advice immediately. It is poisonous if drunk. Call a doctor immediately. Causes serious burns. Eye and skin irritant. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of skin contact, wash immediately with plenty of water. In case of accident or if you feel unwell, seek medical advice immediately. Avoid release to the environment. Consult the safety data sheet. Wear suitable protective clothing, protective gloves, safety glasses / mask when working.
WARNINGS: It is suitable for industrial use only. Keep away from acidic products. Always wear gloves while using.Do not use on Aluminum surfaces. It is not recommended to use in painted places.
